Hot Water Pressure Washer - Proper Maintenance

Hot water pressure washer is great to have because they are powerful allies when it comes to fighting tough dirt and stain. These pressure washers are basically upgraded versions of the standard pressure washer and are mostly used on outdoor settings. They use heat and pressure to help eliminate stubborn dirt. As an added bonus, the hot water used by the pressure washer can help to kill germs and bacteria. Although most units are big, bulky, and expensive, there are some models however that are designed for regular consumers. Some of the common uses of these pressure washers would include sidewalks and driveways. However, in order to make sure that your hot water pressure washer keeps running for years to come, it is important that you provide it with regular maintenance.

1. A hot water pressure washer contains an intake tube where cleaning chemicals can be poured into. These cleaning chemicals spray out of the nozzle along with the water, which is great for helping to dissolve stains and other tough to remove dirt. However, having chemicals left inside the intake can potentially lead to internal corrosion, especially if the pressure washer will be left in storage for quite some time. In order to avoid this, place water on the cleaning chemical reservoir and run the washer for several minutes until all cleaning chemicals have been flushed out.

2. Pressure washer hoses are known to be durable and very capable of withstanding great amounts of pressure. The thing is, if you leave if you leave too much pressure building up inside the hose constantly, there is a high chance that the hose will expand over time. This will result in premature wear requiring untimely replacement.

3. Once you finish using the pressure washer and have turned it off, there is still a collection of water stored in its pump. Leaving the water to sit in the pressure washer pump during storage will create corrosion and hard water deposits. It only makes sense to remove this water from the pump. If you are using a gas pressure washer, pull the crank several times while keeping the nozzle open. If you are using an electric pressure washer, try pressing the starter switch several times to ensure the pump is free of water.

4. Disconnect the pressure washer hose from the hot pressure washer to allow water to drain out completely. This will help ensure that no water gets trapped inside the hoses.

These are just some of the helpful maintenance tips for hot pressure washers. For additional information regarding the proper maintenance of your pressure washer, it is highly advised the you consult the owner’s manual as manufacturers will surely suggest some ways on how you can properly maintain your unit.