Pressure Washing Tips Revealed

People who are familiar with pressure washers know that using them is very much straightforward as the controls are pretty basic and simple. However, there are several things that you should know about pressure washing tips so that you will be able take advantage of your unit’s potential and avoid injury at the same time. If you are not aware how much power your unit can generate, it is always a good idea to take a few minutes of practice and get a feel for the gun, the wand, and the recoil it makes when you depress the trigger.

Testing the power of your pressure washer before washing the surface you plan on cleaning is always a good practice as this will help you eliminate the possibility of stripping paint off the surface you want to clean. There are a lot of newbie pressure washer owners that are so eager to test out their equipment that they fail to test the power of their unit first and ended up ruining the paint job of their walls and wooden fences.

When pressure washing, it is best to choose the most effective spray pattern for that surface. Picking the most suitable pressure washer nozzles will allow you to work more efficiently and minimize the time it takes cleaning. To get better control of the spray, it is highly suggested to use both hands as this will prevent your arms from tiring. In fact, many experienced contractors utilize handles that can be fastened to the wand so that they are able to hold it more securely during operation.

One of the most important things to remember when using pressure washers is to never operate the unit while standing on a ladder. This is because the recoil it generates when pressurized water is released is capable of making you lose your balance, fall off, and potentially injure yourself. If you want to reach elevated areas, it is recommended that you invest in a telescoping wand which is capable of extending up to 24 feet in length. This will allow you to reach elevated areas while keeping both your feet firmly planted on terra firma.

Another thing you need to remember when pressure washing is to avoid spraying at electrical devices such as outlets and light fixtures. This is because spraying on these electrical devices could easily lead to the shorting of your electrical circuitry which can be very dangerous as this could potentially electrocute you. To avoid this, make sure to steer clear of any electrical devices, and if possible, make sure your unit has a Ground Fault Circuit Interrupter (GFCI) so you could protect yourself from electrical shocks.